Crimp pliers for insulated automotive terminals 0.5-6 mm2
Part no. AMP-FUETRIP-NT · 0.5-6 mm2
Ratchet head, 6 interchangeable dies, anti-slip grip, lifetime calibration option.
- Price
- € 58.00 – 76.00
- MOQ
- 1 pc
- Weight
- 0.75 kg
32 stocked series across 10 groups. Prices are indicative ex-works ranges in EUR; send the quantity and the destination and the desk replies with the firm quotation the same working day.
Part no. AMP-FUETRIP-NT · 0.5-6 mm2
Ratchet head, 6 interchangeable dies, anti-slip grip, lifetime calibration option.
Part no. AMP-K630-M · 9-630 A, up to 690 V
400 Hz rated, auxiliary 1NO+1NC built-in, terminal shroud optional; hoist and crane.
Part no. AMP-MPS40-M · 0.6-40 A
Combines short-circuit and overload protection, panel-mountable shaft, VDE/IEC 60947-2.
Part no. AMP-TOL25-17 · 0.6-95 A
Trip-free, manual and reset, ambCompensation to +70 C, clip-on to K-series contactors.
Part no. CAB-TRAY100-6M · 50-400 mm width
Perforated side walls, pre-punched for connector plates, indoor zinc 12 micron.
Part no. CAB-YSLY12X10 · 2-61 core
Fine-wire tinned copper, PUR jacket oil-resistant, fixed installation flexable.
Part no. GIR-PSU24-10 · 5-40 A, 12/24/48 V
3-phase input option, DC-OK relay contact, 45 C full load, 35 mm rail clip.
Part no. GIR-TRISO-1K · 250-5000 VA
For control cabinets, 230 V tapping on the secondary, clamp plate for DIN rail.
Part no. GIR-UPS24-5 · 2.5-40 A
Decoupling, buffer and monitoring for PLC and safety circuits, lead or Li support.
Part no. HAN-PB22-ST-GR · 22.5 mm front, 1NO/1NC
Snap-in LED illuminated option, screw or quick connect, IP40 front plate.
Part no. HAN-ST3T-RGY · 24 V DC / 230 V AC
Modular stack, LED with flashing module, 100 mm mount, IP65, buzzer 85 dB.
Part no. IRO-DUCT80-ACC · 25-120 mm widths
Friction-fit lid, slot pitch 2.5 x 5 mm, snaps to 35 mm rail, PC/ABS UL94 V-0.
Part no. IRO-EN400600-CR · 300x400 to 800x1000
Single-sided key door, galvanized plate, seal to IP54, RAL 7035 or 9002 on request.
Part no. IRO-EN600800-SS316 · 300x300 to 1200x1000
Double-walled door, 3-point lock, earth stud, mounting plate kit, 1.5 mm 316L.
Part no. KRA-DIN35-SS · 2-10 m lengths
Top-hat profile 35x7.5 per IEC 60715, AISI 304, top and side mounting holes.
Part no. KRA-PG29-BR · 18-25 mm cable
Metric and PG thread range, strain-relief insert, UV-stable neoprene seal.
Part no. KRA-ST25-NT · 0.14-4 mm2, 800 V
Screw-clamp, cross-connection capable, UL 1076 approved; 6 mm wide rail body.
Part no. LUM-EX150-VAP · 60-200 W
Ex eb / Ex tb, GRP housing, 3-pole 4 mm entry, temperature class T4.
Part no. LUM-HB150-D · 100-240 W, 4000/6500 K
IK08 die-cast body, 1-10V or DALI, 5-year driver warranty, hook or stem mount.
Part no. LUM-MC21-COOL · 11-42 W
Foam-gasket IP65, switchable to -25 C, 5 linkable per run, PC opal diffuser.
Part no. MER-PE18-RR · 0-1 to 0-400 bar
Ceramic measuring cell, 316L wetted parts, HB10 connector, IP65 sealed version.
Part no. MER-PT31-P16 · 150-400 mm stems
Reed switch in outer tube, PP/PE option for chem, adjustable stem 150-400 mm.
Part no. MER-TT100-PT100 · -200 to +850 C
Form B head with terminal, probe 6 mm AISI316, 1/2 NPT or Tri-Clamp process.
Part no. NOR-VFD1R5-1 · 0.37-4 kW
For pumps, conveyors and fans; potentiometer keypad, external trim-pot option.
Part no. NOR-VFD7R5-3 · 0.37-90 kW
Vector control 1:100, built-in EMC C2 filter, brake chopper to 22 kW, Modbus RTU.
Part no. PEK-DRV3R0-A · 0.5-15 kW
For converting and packaging lines, 3 feedback ports, integrated safety options.
Part no. PEK-SV180-A2 · 0.3-15 kW
23-bit absolute feedback, CoE/EtherCAT and pulse/direction, safe torque off STO.
Part no. THE-ACT230-NC · G1/4 to G1, 0-10 bar
Direct-acting, NBR seat, coil IP65 with LED, water, air and light steam.
Part no. THE-IMM3-25 · 16-125 mm bore, 25-2000 mm
Profile barrel, magnetic piston for reed sensors, cushion screws, ISO mount set.
Part no. VTC-DB24-IP65 · 12-48 ways
Halogen-free PC enclosure, clear door, 3 rows, mounted DIN rail and C-rails busbar.
Part no. VTC-MB63-3P · 6-63 A, 6 kA
4.5 kA switchboard breaker for panel builders, C-curve, 3P+N, snap-in DIN rail.
Part no. VTC-RCCB40-300 · 25-63 A, 30-500 mA
Electromagnetic RCCB for machine and plant circuits; test terminal, busbar mount.